 |
 |
|
R&G
Racing is proud to announce
NOW
IN STOCK |
||
As the world leader in motorcycle crash protection, R&G’s continues to expand in offering complete protection across all areas of a motorcycle and introduces the “Shocktube” for the defense of motorcycle shock absorbers. The Shocktube offers an impact resistant, waterproof, vented tube made from 100% bonded Neoprene, double lined with stretch nylon on both sides. Aimed at riders of all disciplines – road, track and off-road - the R&G Shocktube works by completely enclosing the rear shock absorber and spring to prevent damage from road salt, water spray, stone chipping, dust and dirt that can have a detrimental effect on the performance and looks of the unit over time. Although road bikes ridden in all conditions seem the obvious choice for the R&G Shocktube, expensive aftermarket shocks on race and track bikes can also be damaged by circuit debris. To cope with this extreme environment and to expel moisture, the Shocktube features six 5mm rustproof eyelets inserted into the neoprene skin at the top, middle and bottom to dissipate heat from the shock. Quick and simple to fit thanks to heavy-duty Velcro and supplied zip ties, the Shocktube is available for most mono and twin shock machines along with front suspension on BMW GS machines.
Complete Shocktube application chart.
|
||
| Part # | Description | MSRP |
| SHOCK1BK | Shocktube - 9" x 11.5" | $39.00 |
| SHOCK2BK | Shocktube - 8" x 11.5" | $39.00 |
| SHOCK3BKF | Shocktube - 10" x 10" | $39.00 |
| SHOCK3BKR | Shocktube - 9.5" x 11.5" | $39.00 |
| SHOCK4BK | Shocktube - 9" x 11" | $39.00 |
| SHOCK5BK | Shocktube - 9" x 9" (pair) | $72.00 |
| SHOCK6BK | Shocktube - 9.5" x 12.75" | $39.00 |
| SHOCK7BK | Shocktube - 7" x 11.5" | $39.00 |
| SHOCK8BK | Shocktube - 10" x 11" | $39.00 |
| SHOCK9BK | Shocktube - 8.5" x 10" | $39.00 |
| SHOCK10BKF | Shocktube - 11" x 9" | $39.00 |
| SHOCK10BKR | Shocktube - 9.5" x 11.5" | $39.00 |
| SHOCK12BK | Shocktube - 7.25" x 10.5" | $39.00 |
| SHOCK13BK | Shocktube - 9.5" x 9.5" (pair) | $72.00 |
| SHOCK14BK | Shocktube - 11" x 11" | $39.00 |
| SHOCK15BK | Shocktube - 8" x 9.5" (pair) | $72.00 |
| SHOCK16BK | Shocktube - 8" x 10" | $39.00 |
| SHOCK17BK | Shocktube - 10.5" x 11.25" | $39.00 |
| SHOCK18BK | Special Order - BMW G450X | $39.00 |
For
applications not listed on the accompanying chart use
these instructions for measuring Measuring Instructions: Using a ridged or flexible tape measure, mark down the the spring length from the top edge of the pre-load adjuster ring, to the bottom edge of the lowest part of the spring. Next..... using a flexible tape measure, mark down the diameter of the spring around its thickest part at the top OR bottom of the spring.
|
For
additional pictures and instructions see
R&G's website
www.rg-racing.com
Last Updated: 10/26/10